Wood I-Joists

Wood I-Joists for Residential Construction are engineered for longer spanning, superior performing and quieter floors. I-Joists consist of 2" to 3 1/2" wide solid sawn or engineered wood top and bottom flanges connected by a structural OSB web.

Our joists are Power Joists from Anthony Forest Products
ADI 40 (2 1/2" wide solid flange) (PRI40) 9 1/2" & 11 7/8" (14", 16")
ADI 60 (2 1/2" wide solid flange) (PRI60) 9 1/2" & 11 7/8" (14", 16")
ADI 80 (3 1/2" wide solid flange) (PRI80) 11 7/8", 14", 16" (18", 20", 22", 24")
ADI 90 (3 1/2" wide solid flange) (PRI90) 11 7/8", 14", 16" (18", 20", 22", 24")
Depths in ( ) are special order. Lengths to 52' are available.

Back to Top

Laminated Veneer Lumber (LVL)

Laminated Veneer Lumber (LVL) are structural members produced by laminating wood veneers of approx 1/10" thickness together with exterior adhesive. All veneers are orientated with grain parallel to long dimension of the member. LVL is commonly produced in 1 3/4" thickness which are doubled or tripled using mechanical fasteners to create structural beams and headers.

We stock Masterplank 2.0E LVL from FinnForest in a 1 3/4" width x 5 1/2", 7 1/4", 9 1/4", 9 1/2", 11 1/4", 11 7/8", 14", 16", 18", 20" and 24" depths up to 48' in length.

Back to Top

Hangers

We have an extensive line of steel hangers from Simpson Strong-Tie Co. for connecting LVL's and I-Joists to each other or to other supports.

Back to Top

Scaffold Planks

Scaffold Planks are available from our stock in 1 3/4" x 9" x 16'. These planks are OSHA stamped, lightweight, have clipped corners and pinned ends.

"Lock-Deck" Laminated Wood Decking

Lock-Deck Laminated Wood Decking is a structural heavy timber roof decking from Disdero Lumber produced by face gluing laminations of KD lumber and offsetting the center ply to form a tongue and groove.

It is available in nominal 3x6, 3x8, 4x6, 4x8, 5x6 & 5x8 in Douglas Fir/Larch, Inland Red Cedar, Ponderosa Pine and Southern Pine. Can be obtained in three grades, Industrial (non appearance), Decorative (a high end STK) (95% of the product is used in this grade), and Supreme (clear face). Product is end matched as well as edge matched with a smooth or textured face, v-joint or square edges, and can be factory prefinished. It is usually sold in random lengths 6' to 16' but can be done in specified tallies and by using structural end joints can be obtained up to 32' in length.

We stock the nominal 3x6 (2 3/16" x 5 1/4" actual) Douglas Fir/Larch, Decorative Grade, smooth face, EV1S, CM, EM, R/L

Back to Top

Glulam (Glued Laminated Structural Timbers)

Glulam is made from horizontally laminating nominal 2" lumber with a waterproof adhesive. Highest grades of lumber are put into the upper and lower laminations where tension and compression requirements are the greatest and lower grade material is used in the middle of the beam where stress requirements are less.

We stock an Architectural Appearance Grade Southern Pine glulam from Anthony Forest Products. The Architectural grade is the most commonly used grade for exposed beam applications and each beam is individually wrapped.

Our inventory consists of:
3 1/8" width by 5 1/2", 8 1/4", 9 5/8" & 12 3/8" depths
5 1/8" width by 9 5/8", 11", 12 3/8", 13 3/4", 15 1/8", 16 1/8" & 17 7/8"
All available in lengths up to 48'.

We can special order depths up to 28 7/8" in 3 1/8", 5 1/8", 6 3/4", & 8 3/4" widths in an Industrial, Architectural, or Premium Appearance grade.

Douglas Fir glulams in widths up to 12 1/4" and depths up to 58 1/2" in any grade can also be special ordered.

Back to Top

Pressure Treated Glulam

Pressure Treated Glulam called “Power Preserved Glulam” from Anthony Forest Products are also available. These are industrial grade Southern Pine Glulam that are pressure treated with Hoover “Cop-Guard”. Beams are treated for above ground use and columns have a ground contact retention. They carry a Hoover 25 year warranty.

The following items are in stock:
3 1/2" x 9 1/2", 11 7/8" & 14" to 48'
5 1/4" x 9 1/2", 11 7/8", 14" & 16" to 48'
Columns 5 1/4" x 5 1/2" & 6 3/4" x 6 7/8" to 48'

Back to Top

Anthony Power Column

Power Column is a Southern Pine structural glued laminated timber manufactured in accordance with ANSI A190.1 using Combination 50 layup combinations recognized in the 2005 National Design Specifications (NDS) Supplement, Glulam Design Properties and Layup, APA Form Y117, and AITC 117. Power Column is used primarily as columns, but can also be used as beams, headers, rafters, or purlins, and is manufactured in nominal widths and depths of 4 through 12 inches, and lengths up to 24 feet.

Our inventory consists of:
3-1/2" x 3-1/2" x 8',10',12',16',18' and 20'
3-1/2" x 5-1/2" x 8',10',12',16' and 20'
3-1/2" x 7" x 8',10',12',16' and 20'
5-1/2" x 5-1/2" x 8',10',12',16',18' and 20'
5-1/2" x 7" x 8',10',12',16' and 20'
7" x 7" (6-3/4"x6-7/8" Actual) x 8',10',12',16' and 20'

Back to Top